A professional sewer camera costs from $2,050 for a VIPER push camera to $8,950 for the HATHORN H7 all-in-one, with pan-and-tilt systems from $5,340 and pole-mounted mainline cameras from $4,110 to $13,200. The headline price leaves out the locator, skids and spare heads, which add $80 to $1,693 per item.
The spread exists because the tools do different jobs. A 1-inch head on a push reel suits residential laterals. A pole-mounted zoom camera suits culverts and mainlines. Buy on pipe size, reel length and locating need, not on the lowest number, or you either stop at the first bend or pay for reach you never use. Fiberscope.net sells, rents and services every system named here, with in-house repair and a one-year warranty.
- Complete push-camera systems start from $2,050 (VIPER) and reach $8,950 (HATHORN H7 all-in-one).
- Pan-and-tilt systems start from $5,340 (ANACONDA MID); pole mainline cameras run $4,110 to $13,200.
- A 512 Hz locator is a separate purchase: from $1,390 for the SnapTrack.
- Rent instead of buying if you scope a handful of lines a year.
How much does a sewer inspection camera cost to buy?
Expect $2,050 to $8,950 for a complete push-camera system and $13,200 for a pole-mounted mainline zoom camera. The table lists the lowest listed price for each system and the pipe it is built for. Prices checked September 2026.
| System | Type | From | Built for |
|---|---|---|---|
| VIPER | Push camera, 1-inch head | $2,050 | 1.25 to 6 inch straight runs |
| VIPER Mid | Push camera, mid reel | $3,280 | Laterals and building drains |
| HATHORN Micron | Wi-Fi drain camera | $4,300 | Drain lines up to 100 ft (30 m), about 16 lb (7.3 kg) |
| MiniFlex 2 19mm | Compact plumbing camera | $5,229 | Small drains, from 1.25 inch |
| ANACONDA MID | Pan-and-tilt | $5,340 | Laterals and mainlines |
| iSnake | Pan-and-tilt drain camera | $5,690 | Secondary laterals, drainage pipes |
| MiniFlex 2 36mm | Drain camera | $6,890 | 2 to 6 inch pipes |
| ANACONDA | Pan-and-tilt | $6,990 | Laterals and mainlines |
| HATHORN Mini | Wi-Fi plumbing camera | $7,300 | Plumbing lines |
| HATHORN Mid | Wi-Fi sewer camera | $7,900 | 2 to 12 inch pipes |
| HATHORN H7 | All-in-one sewer camera | $8,950 | Reel, 7-inch screen, recorder and sonde in one frame |
| COBRA | Dual-view pole camera | $4,110 | Manholes, roofs, attics, gutters |
| CYCLOPS TZ | Pole zoom camera | $13,200 | Mainlines and culverts, 4 to 80 inch |
Every price is a starting price. Reel length and head options move the final number.
Push cameras for 1.25 to 6 inch lines: from $2,050
The VIPER is the lowest-cost complete system, and the 1-inch straight-view head is rated for 1.25 to 6 inch straight runs, which covers most residential laterals. It records to SD and USB and the 1-inch self-levelling head carries a 512 Hz sonde. The VIPER Mid, from $3,280, steps up the reel. Neither suits a 1.5-inch line with tight 90-degree bends: the 1-inch head hangs up where a 19 mm camera turns. That job belongs to the MiniFlex 2 19mm, from $5,229.
Verdict: buy a VIPER for laterals in 2 to 6 inch pipe; skip it for 1.5-inch lines with elbows.
Wi-Fi drain and sewer cameras: from $4,300
The HATHORN line sends its own Wi-Fi signal to a phone or tablet through a free app, so there is no monitor to carry. Micron, from $4,300, targets drain lines up to 100 ft (30 m) and weighs about 16 lb (7.3 kg). Mini, from $7,300, and Mid, from $7,900, scale up, with Mid rated for 2 to 12 inch pipes. All three carry a 512 Hz sonde and an IP68 rating. Wi-Fi links the reel to your phone, and the head's depth in the pipe does not set the signal range.
Verdict: buy a HATHORN Mid when one rig has to cover 2 to 12 inch pipe; skip the Micron for mainlines.
Compact plumbing cameras: from $5,229
The MiniFlex 2 19mm costs more than a VIPER because the head is 19 mm (0.75 in), small enough for pool and spa elbows and P-traps, and it carries a 512 Hz sonde and records to SD. The 36 mm (1.4 in) MiniFlex 2, from $6,890, covers 2 to 6 inch pipes with a larger, brighter head. A customer on the 19 mm model, Hayden E., reports using it on 1.5-inch pool elbows to diagnose a collapsed skimmer line.
Verdict: buy the 19 mm for small drains and tight bends; hold the 36 mm for 2 to 6 inch work only.
Pan-and-tilt mainline systems: from $5,340
The ANACONDA MID, from $5,340, and the ANACONDA, from $6,990, put a pan-and-tilt head on a reel, so you look up laterals and into joints without moving the cable. Heads and reel are IP68 and carry a 512 Hz sonde. The iSnake, from $5,690, also pans and tilts and suits secondary laterals and drainage pipes. A pan-and-tilt head changes the view direction. It does not propel the camera, so long runs still need a skid and a good push.
Verdict: buy a pan-and-tilt when you document laterals off a mainline; skip it for a basic blockage check.
All-in-one sewer camera: HATHORN H7 from $8,950
The HATHORN H7 builds the reel, 7-inch screen, recorder and sonde into one frame, so there is no separate monitor or controller to set up. It is the highest-priced push system on the list because it replaces the monitor and recorder you would otherwise add.
Verdict: buy it when speed of setup matters on every call; skip it if a $2,050 VIPER already fits your pipes.
Pole mainline cameras: $4,110 to $13,200
A pole camera works from a manhole and does not need a push cable. The COBRA, from $4,110, is a telescopic dual-view unit for manholes, attics, roofs and tanks. The CYCLOPS TZ, from $13,200, is a zoom camera for straight mainlines and culverts from 4 to 80 inch. Neither enters a lateral. For that job you need a push or pan-and-tilt system.
Why sewer camera prices vary
Six factors set the final price:
- Pipe size and head diameter. Smaller heads and tighter-radius cameras cost more per inch of pipe covered.
- Reel and cable length. Longer reels add weight and cost. The cable length ranking compares reels side by side.
- Pan-and-tilt. Moving the lens instead of the cable adds roughly $3,000 to $4,000 over entry push cameras, from the table above.
- Sonde. A 512 Hz sonde in the head makes the camera locatable, but you still need a receiver.
- Recording and viewing. SD or USB recording, built-in screen or Wi-Fi to a phone each change the system.
- Environment rating. HATHORN, ANACONDA and the VIPER 1-inch straight head are rated IP68. IP68 means immersion beyond 1 m under the maker's stated conditions, and it applies to the rated parts, not the whole system.
What you'll also need
Locating takes three parts: a camera with a sonde in the head, a receiver tuned to its frequency, and a clear path to the surface. The SnapTrack locator, from $1,390, receives 512 and 640 Hz, with 815 Hz and 33 kHz optional. The Schonstedt XT512, from $1,693, receives 512 Hz plus passive 50/60 Hz. Rebar and metal distort the field, so treat depth readings under heavy reinforcement as unreliable.
Skids keep the head centered and lift it over debris. A 1-inch Sewer Camera Skid Set costs $80, the Mini Roller Skid $135, the TrapMaster $160 and the Universal Roller Skid, for 6 to 14 inch lines, $440. Spares matter too: VIPER camera heads start from $232 and push cable reels from $477.
How much does a sewer camera locator cost?
A locator costs $1,390 for the SnapTrack and $1,693 for the Schonstedt XT512. Match the receiver to the sonde frequency in your camera head, and buy the system and the locator together when you plan to mark defects before excavation.
Is a pan-and-tilt sewer camera worth the extra cost?
Pan-and-tilt costs from $5,340 against $2,050 for an entry push camera. It pays back when you inspect laterals off a mainline and need to look sideways without moving the cable. It adds nothing for a single-blockage check.
Buy or rent a sewer camera?
Buy when you scope lines every week. Rent when the job is a one-off. Fiberscope.net runs a rental program for short jobs, and the rental worth-it guide shows where the break-even sits. Plumbers on a tight budget will find the budget sewer camera picks useful before settling on a tier.
FAQ
What is the cheapest complete sewer camera at Fiberscope.net?
The VIPER drain camera, from $2,050. It runs a 1-inch straight-view head rated for 1.25 to 6 inch straight runs and records to SD and USB.
Which sewer camera fits a 1.5-inch line with tight bends?
The MiniFlex 2 19mm, from $5,229. Its 19 mm (0.75 in) head turns through elbows and P-traps where a 1-inch head stops.
Does the price of a sewer camera include a locator?
No. The locator is a separate purchase: from $1,390 for the SnapTrack and $1,693 for the Schonstedt XT512. The camera head needs a sonde at a frequency the receiver reads.
Which sewer cameras send video to a phone?
HATHORN Micron, Mini and Mid, from $4,300, broadcast their own Wi-Fi signal to a phone or tablet through a free app.
Can I rent a sewer camera instead of buying?
Yes. Fiberscope.net runs a rental program for short jobs. Call 1-877-613-2210 for availability and a match to your pipe size.
What warranty comes with a Fiberscope.net sewer camera?
Every system carries a one-year warranty, backed by in-house testing and repair in Winnipeg, Manitoba and Woburn, Massachusetts.
Get a configuration review
Send Fiberscope.net your pipe ID, run length, bends and traps, pipe material, whether you need locating and which locator frequency you already own, and whether you need recorded reports. A specialist will match the right head and reel to the job. Call 1-877-613-2210, Monday to Friday, 8:00 to 18:00 CST.
About the author. Vladimir Khubiryants, Founder & President, Fiberscope.net (MEDIT Inc.). Vladimir Khubiryants founded Fiberscope.net to give professionals access to reliable video inspection equipment without enterprise pricing. For over 20 years he has sourced and tested borescopes, sewer cameras and fiberscopes in Fiberscope.net's in-house test and repair facility, helping plumbers, pipeline engineers, aviation and military teams choose the right tool for the job. See our cameras in use on YouTube and Instagram.







Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.