A micro borescope costs from $1,750 for the Super Thin optical model to $11,100 for the MICRON video unit, with the Ultra Fine optical model at $3,520. The optical models are priced as scopes only, so a light source ($299 to $1,490) and a USB video camera ($900 to $1,270) go on top.
- Micro borescopes start at $1,750 (Super Thin), $3,520 (Ultra Fine) for optical, and $11,100 for the MICRON video unit.
- Optical models need a light source ($299 to $1,490) and a USB capture camera ($900 to $1,270) as separate purchases.
- Three sample optical builds run $2,949 to $4,719; the MICRON costs $6,381 more than the Ultra Fine build.
- Pick by probe diameter first, then by whether you want video output built into the scope.
For jobs that need a probe near 1.0 mm (0.04 in), such as machined parts and tiny passages, most buyers land on the Super Thin Micro Borescope with a light and USB camera, about $2,949 in total. The Ultra Fine is the premium optical line, and the Micro Video Borescope MICRON suits teams that want USB 3.0 and HDMI output in one unit. Fiberscope.net sells the products discussed here and services them in-house.
How much does a micro borescope cost to buy?
A micro borescope costs from $1,750 to $11,100 depending on whether it is optical or a self-contained video unit. Prices below were checked on each product page at publication.
| Model | Type | From | Video output |
|---|---|---|---|
| Super Thin Micro Borescope | Optical | $1,750 | Needs a separate camera |
| Ultra Fine Micro Borescope | Optical, no articulation | $3,520 | Needs a separate camera |
| Micro Video Borescope MICRON | Video | $11,100 | USB 3.0 and HDMI |
The $9,350 spread between the cheapest and the dearest model is mostly the camera and electronics built into the MICRON. For a ranked look at fit by bore size, see best micro borescopes.
Super Thin Micro Borescope: from $1,750
The Super Thin is the entry point, with probe diameters starting from 1.0 mm (0.04 in). It is built for tiny areas and machined parts, and it is the lowest-cost way into micro inspection on the store.
It is an optical scope, so you look through an eyepiece until you add a light and a camera. With a SPARK light handle ($299) and a USB Borescope Camera ($900), the build comes to $2,949. It suits maintenance and machining shops that inspect small bores a few times a week and need a saved image for the job file.
Ultra Fine Micro Borescope: from $3,520
The Ultra Fine costs $1,770 more than the Super Thin and sits in the premium line of super-thin flexible fiberscopes for extremely small inspection areas. The probe has no articulation, so you steer it by feeding and rotating the cable.
With the same SPARK handle and USB Borescope Camera, a complete build is $4,719. Choose it when the Super Thin does not reach the geometry you are inspecting. If a straight bore is the only target, the Rigid Borescope from $378 is the cheaper tool, and it needs a light source too.
Micro Video Borescope MICRON: from $11,100
The MICRON outputs video over USB 3.0 and HDMI, so it connects to a computer or monitor without a separate camera or coupler. It is built for ultra-thin bores where a fiber image on a capture camera is not enough.
The price is $6,381 above the Ultra Fine build with SPARK and USB camera. That premium buys convenience and a single unit to carry, and it does not make the MICRON the right choice for occasional work. If you inspect small bores weekly and want one device, it is worth pricing. If you inspect monthly, an optical build is the honest answer.
What you'll also need
Optical micro borescopes need a light source and a video camera, and these are separate line items that decide the final cost.
- Light source: SPARK LED Light Handle from $299, or the MS-LED Borescope Light Source from $1,490.
- USB capture camera: the USB Borescope Camera from $900 is a Windows capture camera for scopes with a 32 mm (1.26 in) eyepiece. ImagePRO USB 3.0 from $1,270 sends live video to a computer.
- Display only: ImagePRO HDMI from $1,580 outputs to a monitor and has no capture.
- Coupler: the Universal Borescope Video Coupler from $250 joins the eyepiece to a camera body.
Four builds, priced out
A complete micro borescope setup costs $2,949 to $11,100 across the four builds below.
| Build | Parts | Total |
|---|---|---|
| Entry optical | Super Thin + SPARK + USB Borescope Camera | $2,949 |
| Shop optical | Super Thin + MS-LED + ImagePRO USB 3.0 | $4,510 |
| Premium optical | Ultra Fine + SPARK + USB Borescope Camera | $4,719 |
| Self-contained video | MICRON | $11,100 |
The entry build covers most first-time buyers. The shop build adds a bench-style light source and a higher-grade camera for $1,561 more.
Why micro borescope prices vary
Price follows five factors, and each one shows up in the numbers above.
- Optical or video: the MICRON is a video unit at $11,100; optical scopes start at $1,750.
- Probe line: the Ultra Fine premium line is $1,770 above the Super Thin.
- Light source: $299 for a handle against $1,490 for a source.
- Camera and output: USB capture from $900, HDMI display from $1,580 with no recording.
- Coupler and eyepiece fit: a coupler adds $250 when the camera body needs one.
When a cheaper tool is the honest answer
If the bore is wide enough for a larger probe, a bigger scope costs less. The Rigid Borescope from $378 handles straight runs, and inspection cameras ranked by probe diameter shows which Fiberscope.net tools clear which openings. Consumer cameras from Teslong and Depstech sell under $300 and work for occasional non-professional checks, with limited probe durability and service. For measurement-grade industrial videoscopes, Evident's IPLEX line is the benchmark and costs far more than anything above. The American Society for Nondestructive Testing is the reference for inspector qualification if your work is certified NDT.
FAQ
What is the cheapest micro borescope?
The Super Thin Micro Borescope at from $1,750. It is optical, so budget $299 for a SPARK light handle and $900 for a USB Borescope Camera, about $2,949 in total.
Does the MICRON need a separate camera?
No. The MICRON outputs video over USB 3.0 and HDMI, so it connects to a computer or monitor directly. It starts at $11,100.
Can ImagePRO HDMI record video from a micro borescope?
No. ImagePRO HDMI from $1,580 outputs to a monitor and has no capture. For recording, use ImagePRO USB 3.0 from $1,270 or the USB Borescope Camera from $900.
Does the Ultra Fine Micro Borescope articulate?
No. The Ultra Fine has no tip articulation. You steer it by feeding and rotating the cable, so it suits straight or gently curved access.
Is the light source included in the scope price?
The scope prices of $1,750 and $3,520 are for the scopes themselves. Light sources are separate products, from $299 for the SPARK handle to $1,490 for the MS-LED.
Can I rent or demo a micro borescope before buying?
Yes. Fiberscope.net offers buy, rent or demo options, so a short job or a trial can come before a purchase of $1,750 or more.
Get the right configuration
Send your access opening, whether the route is straight or turning, insertion length, viewing direction, working environment and recording needs through the Fiberscope.net contact page or call 1-877-613-2210. A Fiberscope.net specialist will match the scope, light and camera, including eyepiece and connector fit, before you buy.
About the author. Vladimir Khubiryants, Founder & President, Fiberscope.net (MEDIT Inc.), founded Fiberscope.net to give professionals access to reliable video inspection equipment without enterprise pricing. For over 20 years he has sourced and tested borescopes, sewer cameras and fiberscopes in Fiberscope.net's in-house test and repair facility, helping plumbers, pipeline engineers, aviation and military teams choose the right tool for the job. See our cameras in use on YouTube and Instagram.
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.